[KJB Security Products Informational Knowledgebase] Recently Changed Articles

Does the C1190 record upto 4 cameras simultaneously

Thu, 29 Jul 2010 14:21:29 GMT

Q. Does the C1190 record up to 4 cameras simultaneously? A. Yes, but only when using the RCA output of the receiver. The C1190 receiver had a quad display and output capability but will not allow for quad view or recording when using the supplied software. It will only record 4 cameras simultaneously when connecting the receiver via RCA to a separate recording device i.e. DVR, VCR, etc.

C1021 IS DISCONTINUED

Mon, 19 Jul 2010 21:25:06 GMT

tHE C1021B/W BUTTON CAMERA HAS BEEN DISCONTINUED. THE C1020 IS COLOR VERSION AND IS IN STOCK.

How do I set the time and date on my DVR275

Mon, 07 Jun 2010 22:00:01 GMT

Q. How do I set the time and date on my DVR275? A. Connect the sunglasses to the USB port, when the window opens click on view files, look for the file titled "get time and date", click on the file open the file then click on "get time and date". This will extract the time and date from your PC and change the enternal clock of the DVR275 to match.

Q: HOW DO I GET MY C1192 TO RECORD ON MOTION?

Mon, 07 Jun 2010 21:45:15 GMT

Q: HOW DO I GET MY C1192 TO RECORD ON MOTION? A: CLICK THE MOTION DETECTION ICON (RUNNING MAN) AND SELECT RECORD. IF YOU DO NOT CLICK RECORD AFTER THE RUNNING MAN IS SELECTED IT WILL NOT RECORD.

Q: HOW DO I GET MY ALL DIGITAL WIRELESS COVERT SYSTEM TO RECORD ON MOTION?

Mon, 07 Jun 2010 21:44:45 GMT

Q: HOW DO I GET MY ALL DIGITAL WIRELESS COVERT SYSTEM TO RECORD ON MOTION? A: CLICK THE MOTION DETECTION ICON (RUNNING MAN) AND SELECT RECORD. IF YOU DO NOT CLICK RECORD AFTER THE RUNNING MAN IS SELECTED IT WILL NOT RECORD.

HOW DO I SET MOTION DETECTION FOR THE SC31?

Fri, 04 Jun 2010 21:19:16 GMT

Q: HOW DO I SET MOTION DETECTION FOR THE SC31? A: 1 Turn on Camball by pressing and holding the center button. 2.Make sure Camball is in Standby Mode (Standby Mode means TV, REC,MP3, TYPE are off, MEM, BAT,OVER are green) and press and hold TYPE and make it red(red is Surveillance Recording, green is Vehicle Recording, red/green is Angel Recording) 3. Press REC and make it red.

MP1 HAS BEEN DISCONTINUED

Fri, 14 May 2010 16:00:28 GMT

MP1 HAS BEEN DISCONTINUED, REPLACED BY THE MP2

C1171 IS DISCONTINUED

Fri, 14 May 2010 15:56:17 GMT

The C1171 Tactical camera has been discontinued.

DVR80 WILL BE DISCONTINUED REPLACED BY THE DVR90

Fri, 14 May 2010 15:55:39 GMT

DVR80 WILL BE DISCONTINUED REPLACED BY THE DVR90

Why won't my iTrail will not download data

Fri, 14 May 2010 15:49:46 GMT

Q. Why won't my iTrail will not download data? A. As of 5/7/2010 a new version of the iTrail software has been released and can be download at www.myitrail.com. This will repair any problems with the iTrail not downloading data.

New Upgrade 5/10/2010 H6000

Tue, 11 May 2010 13:15:40 GMT

When the iTrail software prompts that an update is available you can choose to click ok and begin the update process. Please make sure that you select the downloand that is specified for your computers operating system. This current upgrade has two files, 1. for Windows 7, and the other is for Windows XP and Vista.

How can I see the trip with Google Earth?

Mon, 10 May 2010 15:03:38 GMT

How can I see the trip with Google Earth?

Click the Google Earth button on the main menu after the track data downloaded, then you can show the trip track in Google Earth.

How do I backup/export my initial track data?

Mon, 10 May 2010 15:01:54 GMT

How do I backup/export my initial track data?

iTrail PC software provides following report format to export:

PDF - (PDF reader) The PDF report shows details of Date, Departed from, Arrived at, Total driving time, Total distance, Maximum speed, and Above speed limit Above time duration. Trip details are for Departure Time, Trip Duration Time, Arrival Time, Location Arrived, Distance Covered and Stop Time.

HTML - (Browser) The HTML report shows details of Date, Departed from, Arrived at, Total driving time, Total distance, Maximum speed, and Above speed limit Above time duration. Trip details are for Departure Time, Driving Time, Arrival Time, Location Arrived, Distance Covered and Stop Time.

MS-Word - (Microsoft Word) The Word report shows details of Date, Departed from, Arrived at, Total driving time, Total distance, Maximum speed, and Above speed limit Above time duration. Trip details are for Departure Time, Driving Time, Arrival Time, Location Arrived, Distance Covered and Stop Time.

SKX - iTrail (Please note, we can export SKX and send it to other user(s) and vice-versa to generate report by Import.)

KML - (Google Earth) The KML shows the trip in Google Earth.

CSV - (Microsoft Excel) The CSV report contains the raw record which was downloaded from logger. Raw record contains Date, Time, Latitude, Longitude, Altitude, Speed, Distance and Course of each logged record.

GPX - (Any GPX reader/ Google Earth) The GPX report shows raw GPS records from the logger. You can access the Export options from main menu also.

How do I import the data from iTrail GPS logger into iTrail PC software?

Mon, 10 May 2010 14:57:11 GMT

How do I import the data from iTrail GPS logger into iTrail PC software?

Please follow the steps as below to import data from iTrail GPS logger.
a. Connect GPS Logger to PC.
b. You will get following popup window:

c. Click on 'Yes' button
d. iTrail software will start downloading data from iTrail unit.
e. If device is empty or data has already downloaded, the application displays 'No new Report Available' message.

f. After successfully reading data from the logger, iTrail opens Memory Info window, following which the report will be generated. After report generation, it opens Trip Info window to specify trip name, vehicle info and driver info.
g. After submitting Current Configuration, it opens Map in right hand side. (Please note that for Map to be displayed, internet connection is required)

Memory Info
Shows available memory of the GPS logger in Kilobytes(KBs) or Megabytes(MBs) (depending on the data available in logger)

There is a ‘Clear Device’ button to remove the logger data.

Trip Info
This pop-up window asks user to enter following data:

Trip Name
Used to enter the name for the trip. Trip name will be used to view report further.

Vehicle Info
Used to select the Vehicle information. Vehicle info will be displayed in various reports. If you haven’t added any vehicles, you can use ‘Add Vehicle’ button to add new vehicle. Newly added vehicle can be used for further downloaded data.

Driver Info:
Used to select Driver’s name. Driver name will be displayed in various reports. If you haven’t added any drivers, you can use ‘Add Driver’ button to add new driver. Newly added driver can be used for further downloaded data.

If logger is not registered yet with iTrail, iTrail creates entry for the logger in ‘Logger’ table at Left hand side.

You can rename the default logger name by right click on logger entry.

iTrail creates entry of downloaded trip in bottom left hand side table.

How to change the logging interval time?

Mon, 10 May 2010 14:34:36 GMT

How to change the logging interval time?

Click Setup Device , if logger is already connected, Device Setup shows green indication otherwise it shows red indication. Connect logger if is not connected, please wait a while until Device Setup does not show green indication. Then, you can change the interval time.

How do I activate my iTrail GPS logger?

Mon, 10 May 2010 14:32:56 GMT

How do I activate my iTrail GPS logger?

On first use, the user must activate the iTrail. To activate, click 'Help' on menu bar and select 'Activate iTrail'.

The user is asked to enter details for Software Key and Activation Key (this info is available on the box). Once entered, iTrail is activated and ready for use

How do I reset the iTrail GPS logger?

Mon, 10 May 2010 14:26:39 GMT

How do I reset the iTrail GPS logger?

You can reset your iTrail GPS logger via iTrail PC software. Simply select the “Hardware Settings” option, then click the “Reset” button to reset.

Note: If you click the “Reset” button, it will clear all data, include the logged data and settings.

Is the iTrail resistant to water or moisture?

Mon, 10 May 2010 14:25:16 GMT

Is the iTrail resistant to water or moisture? The iTrail GPS logger is manufactured to be "outdoor waterproof", which means that it is resistant to normal rain and moisture conditions outside. It is not "underwater proof", meaning that it cannot be submerged under water.

How long can I use the Trail GPS logger on a single battery charge?

Mon, 10 May 2010 14:24:33 GMT

How long can I use the Trail GPS logger on a single battery charge?

The battery life will depend upon the tracking interval of iTrail GPS logger. Please refer to the iTrail GPS logger battery life chart below to estimate the battery life for your iTrail GPS logger:

Interval	iTrail GPS Logger
1-5 seconds	Around 15 hours
6-10 seconds	Around 30 hours
11-15 seconds	Around 60 hours
16-30 seconds	Around 80 hours

Note: Data may vary with the different environment.

How to Make Sure There Are No Driver Conflicts

Mon, 10 May 2010 14:23:37 GMT
How to Make Sure There Are No Driver Conflicts

Please confirm the following when you connect the iTrail GPS logger with the PC:
(1) When you connect the iTrail GPS logger with the PC, the red LED indicator will stay and the blue LED indicator blink.
(2) When you open the iTrail PC software, it will detect the iTrail GPS logger device automatically.
(3) Please go to "Control Panel" choose "System", choose "Hardware", choose "Device Manager"; to see if there is"GPS Logger USB Com Port(COMxx)" under "Ports (COM&LPT). (please refer to the picture below)

How do I know when the iTrail GPS Logger memory is full or the battery has run down?

Mon, 10 May 2010 14:22:43 GMT
How do I know when the iTrail GPS Logger memory is full or the battery has run down?

Memory is full:
The red LED indicator blinks every 3 seconds.

Low Battery :
The red LED indicator blinks every 5 seconds, the iTrail GPS logger stopped tracking.

Can I change the battery of the iTrail GPS logger?

Mon, 10 May 2010 14:14:00 GMT
Can I change the battery of the iTrail GPS logger? In order to make the iTrail water-resistant, the iTrail GPS logger is manufactured in a tightly-sealed housing which does not allow for the battery to be removed or replaced.

Will the time record change if I cross into a different time zone?

Mon, 10 May 2010 14:13:41 GMT
Will the time record change if I cross into a different time zone? Since the time on your iTrail GPS logger is automatically set by the GPS satellites that it is connected to, if you cross another time zone, the iTrail GPS logger will automatically adjust the time.

How do I adjust time of the iTrail GPS logger?

Mon, 10 May 2010 14:13:25 GMT
How do I adjust time of the iTrail GPS logger? The time on your iTrail GPS logger is automatically set by the GPS satellites when a GPS fix is acquired. This ensures that the time is always correct on your device.

How much data can iTrail GPS logger store?

Mon, 10 May 2010 14:12:31 GMT
How much data can iTrail GPS logger store? You can record up to 120 hours of data. Note: Data may vary with the different environment.